AUDIOLINE Watch & Care V160 Manual De Instrucciones página 26

Operating the Receiver
1. Press .
2. Select Temperature using
- Minimum: You can set the minimum temperature between 11°C (52°F) and 20°C (69°F).
The pre-set minimum temperature is 15°C (57°F).
- Maximum: You can set the maximum temperature between 21°C (70°F) and 30°C (86°F).
The pre-set maximum temperature is 24°C (85°F).
- Alert: The temperature alert will only work when viewing that particular Baby unit in single-CAM or
multi-CAM mode.
- Format: You can set the temperature format as either Celsius or Fahrenheit.
Setting the vibration alert
You can set whether you want the Parent unit to vibrate. The vibrate setting is pre-set to On if speaker is off.
The following events will cause the Parent unit to vibrate (when set to do so):
• Low battery alert (Parent or Baby unit).
• Loss of link alert.
• Temperature alert.
• Sensitivity level exceeded.
1. Press .
2. Select Vibration using
3. Select an option using
Sound activated screen
When the Parent unit screen is turned off, you can set the screen to turn on automatically whenever there are
sounds detected from the Baby unit(s). The Parent unit screen will turn off automatically when no sounds are
detected from the Baby unit(s) within 30 seconds. The default setting is Off.
Even when enabled, the sound activated screen functionality will temporarily be suspended if you press any
button on the Parent unit.
To resume sound activated screen functionality, press and hold the
Parent unit will only turn On if the sounds detected are from the last viewed camera, or any camera if the view
was multi-CAM mode.
1. Press .
2. Select Sound activated screen using
3. Select an ON or OFF using
Brightness
You can change the brightness of the Parent unit screen from between Level 1 to Level 5. The default setting is
Level 3.
1. Press .
2. Select Brightness using
3. Select an option using
24
or and press
or and press
or and press
or and press
or and press
or and press
or and press
or to confirm.
or to confirm.
to confirm.
button until the screen turns off. The
or to confirm.
to confirm.
or to confirm.
to confirm.