Operating The Receiver - AUDIOLINE Watch & Care V160 Manual De Instrucciones

Operation
Check the transmitter and receiver are working properly each time before the equipment is put into
operation.
Operating the Transmitter
Switching the transmitter on/off
1. Press and hold the ON/OFF button until the light on the button turns on.
2. To turn the Baby unit off, press and hold the ON/OFF button for approx. 2 seconds. The light will turn off.
Night vision
The transmitter is equipped with infrared diodes. This enables the transmission of pictures from areas
which are not illuminated. The night vision function is activated automatically when the light conditions
make it necessary.
When the night-time vision function is activated, the screen display on the receiver turns to
black and white.
Adjusting the volume
You can adjust the loudspeaker volume from Level 1 to Level 5. The default setting is Level 3.
1. Press the or
Playing lullabies
The Baby unit has five lullabies that can be played to gently soothe your baby. The total lullaby playback time is
about 15 minutes and it starts from where you stopped it last time.
1. Press the button to play.
2. Press the button to skip to the next lullaby.
3. Press the button to stop playback.

Operating the Receiver

Switching the receiver on/off
1. Press and hold the ON/OFF button until the display screen turns on.
2. To turn the Parent unit off, press and hold the ON/OFF button until the display screen turns off.
Adjusting the volume
You can adjust the loudspeaker volume from Volume 1 to Volume 7 or you can switch it off. The default setting
is Volume 4. When the loudspeaker volume is set to off, the
turns on.
1. Press the or
Zoom in single-CAM mode
You can zoom in or out while viewing images transmitted from the Baby unit.
button to increase or decrease the loudspeaker volume.
button to increase or decrease the loudspeaker volume.
icon appears on the screen and the
GB
light
21