Settings; Changing Direction Of Rotation; Selecting The Operating Mode; Tool Holder, Attachments - Festool BHC 18 Manual De Instrucciones

Changing direction of rotation

• Switch to the left = clockwise rotation
• Switch to the right = counterclockwise rotation

Selecting the operating mode

Hammer drilling
Set selector switch [1-5] to hammer sym-
bol.
WARNING
Risk of injury

Always disconnect the battery pack before per-
forming any type of work on the machine!

Changing tools

 The SDS-plus system clamps drilling tools in
position without requiring a tool wrench.
CAUTION
Hot and sharp tools
Risk of injury

Wear protective gloves.

Settings

[1-3]

Tool holder, attachments

[5]
Screwdriving/drilling
Set selector switch [1-5] to drill symbol.
5
2
Inserting the tool

Clean the tool shaft and grease lightly.

Do not retract the release sleeve [5-2], instead
turn the tool into the tool adapter [5-1] until it
clicks into position.

Check that the tool is seated securely.
Removing the tool

Pull back the release sleeve [5-2] and remove
the tool.
5-1
click
1
5-2
13