Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Installation
clearances
The location must be large enough to fully open
the washer door.
• Washer dimensions
_u _c_/
29 3/4" I_'l
4" I
(75.6 cm)
(10 cm)
]Side view]
3811/16"
(98.3 cm)
_9 3/4"
(75.6 cm)
• Most installations require a minimum 4 in.
(10 cm) clearance behind the washer.
• Minimum
installation
spacing
for
recessed
area installation.
The following dimensions shown are for the minimum
spacing allowed.
Additional spacing should be considered for
installation and servicing.
• Additional clearances might be required for wall,
door and floor moldings.
• Additional spacing of 1 in. (2.5 cm) on all sides of
the washer is recommended to reduce noise
transfer.
Companion appliance spacing should also be
considered.
1"_
27"
__1"
(2.5 cm)
(68.6 cm)
(2.5 cm)
[Front view[
• Level floor
• Allowable slope under entire washer is 1°.
• To minimize noise and vibration, the washer
MUST be installed on a solidly constructed
floor.
• Carpeting and soft tile surfaces are not
recommended.
NOTE:
• Never install the washer
on a platform
or weakly
supported
structure.
A firm, solid floor is even more
critical
to a
front-loading
washer
than to a top-loader.
If your floor is wood and/or
frame
construction,
you may need to rein|brce
it.
Front-loaders
use substantially
faster
spin
speeds
than top-loaders,
causing
greater
vibration.
If the floor is not solid, your washer
will vibrate.
You will hear and feel the
vibration
throughout
your house.
• Power outlet
• Must be within 60 in. (1.5 m) of either side of the
washer. Do not overload the outlet with more
than one appliance.
• Time-delay fuse or circuit breaker is recommended.
NOTE: It is the personal responsibility
and obligation
of the customer to have a proper outlet
installed by a qualified electrician.
6
Tabla de contenido
