Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING
• Two or more people may be need to install and move the appliance.
Install or store unit where it will not be exposed
to temperatures
below freezing or
exposed to outside weather
conditions.
Properly ground washer to conform with all governing
codes and ordinances.
To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed
by carpeting
when the washing machine is installed
on a carpeted floor.
In countries where there are areas which may be subject
to infestation
by cockroaches
or other vermin, pay
particular
attention to keeping
the appliance and its surroundings
in clean condition at all times.
Damage caused by cockroaches
or other vermin will not be covered by the appliance
warranty.
m Shipping
bolts
The appliance is fitted with shipping bolts to prevent
internal damage during transportation.
Packing and all shipping bolts must be removed
before using the washer.
_- When unpacking the base, be sure to remove
the additional packing support in the middle of
the base packing.
Base Packing
g Support
m
Removing
shipping
bolts
1. To prevent internal damage during transport,
4 locking bolts are installed. Before operating
the washer, remove the bolts and braces.
• If they are not removed, it may cause severe
vibration, noise, and malfunction.
3. Take out the 4 bolts and braces by twisting
the braces slightly. Keep the 4 bolts, braces
and the wrench for future use.
• Whenever the appliance is transported, the
shipping bolts and braces must be reinstalled.
2. Unscrew the 4 bolts with the wrench supplied.
Do first lower side to remove easily. One of the
bolts retains the power cord of the washer to
prevent operating without removing bolts.
4. Close the holes with the caps supplied.
:7
Tabla de contenido
