TFA Dostmann 30.3006 Manual De Instrucciones página 31

WIRELESS 433 MHZ TEMPERATURE STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this Temperature Station with wireless 433 MHz
transmission of outdoor temperature and display of indoor temperature and
humidity. It is further featuring a DCF-77 radio controlled clock with calendar display
and two alarms. With eight easy to use function keys, this innovative product is
ideal for use in the home or office.
FEATURES:
The Temperature Station
LCD Display
Function
Keys
•
DCF-77 Radio controlled time with manual setting option
•
24 hour display
•
Hour and minute display, seconds indicated by flashing dot
•
Time zone option ±9 hours
•
Features 2 alarms with snooze function
•
Weekday with date or date with month calendar display
•
Indoor temperature reading in °C with minimum and maximum recording
•
Indoor humidity reading displayed as RH% with minimum and maximum
recording
•
Indoor comfort level indicator by happy or sad face icons
•
Outdoor temperature reading (for up to 3 transmitters) in °C with minimum
and maximum recording
•
All minimum and maximum recordings show date and time received and can
be reset
•
Can take up to three outdoor transmitters
•
Wall mountable or table standing
The Outdoor Transmitter
Hanging Hole
SETTING UP:
1. First, insert the batteries into the Temperature Station (see "How to install
and replace batteries in the Temperature Station" below). Once the
batteries are in place, all segments of the LCD will light up briefly and a short
Battery Cover
signal tone will sound. Then the indoor temperature and humidity, the time as
0:00 and the date as 1.1. will be displayed. If the indoor temperature and
humidity are not displayed after a few seconds, remove the batteries and wait
for at least 10 seconds before reinserting them. Once the indoor data is
displayed proceed to step 2.
2. Within 3 minutes of activating the Temperature Station, place the batteries
Detachable Stand
into the transmitter (see "How to install and replace batteries in the
Temperature Transmitter" below).
3. After inserting the batteries into the transmitter, the Temperature Station will
start receiving transmissions from the transmitter. The outdoor temperature
should then be displayed on the Temperature Station. If this does not happen
within 15 minutes, the batteries will need to be removed from both units and
reset from step 1.
4. The Temperature Station can take up to 3 remote transmitters. If you have
purchased additional transmitters, follow step 2 for all extra transmitters.
However, ensure that you leave 10 seconds in between the reception of the
last transmitter and the set-up of the following transmitter. The Temperature
Station will number the transmitters in the order of set-up, i.e. the first
transmitter will have the temperature displayed with the number 1 against it
and so on.
5. When all the transmitters are set up, there is a testing period, during which
the display switches quickly between all the received transmitters at random,
according to which random transmission it receives. Pressing any key will
•
Remote transmission of
outdoor temperature to
temperature station by
433 MHz signals
•
LCD showing current
Battery Cover
temperature
•
Shower proof casing
•
Wall mounting case
•
Mounting at a sheltered
place. Avoid direct rain
and sunshine