if your product utilizes batteries, the following additional precautions should be
observed:
1 Use only the type and size of batteries specified in the user manual.
2 Do not dispose of batteries in fire. They may explode. Check with local regulations for possible
special disposal instructions.
3 Exercise care in handling batteries in order not to short out the batteries with conducting
materials such as rings, bracelets and keys. Overcharging, short circuiting, reverse charging,
mutilation, or incineration of batteries must be avoided to prevent one or more of the following
occurrences: release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface
temperature.
4 Do not attempt to recharge batteries provided with or identified for use with this product that
are not intended to be charged. The batteries may leak corrosive electrolyte or explode.
5 Do not attempt to rejuvenate the batteries provided with or identified for use with this product
by heating them. Sudden release of battery electrolyte may occur, causing burns or irritation to
eyes or skin.
6 If and when necessary, the batteries must be replaced with identical new ones from the same
manufacturer. If a battery to be replaced is connected with other batteries in series, it is
recommended that the other batteries be replaced with new ones at the same time.
7 Reverse polarity installation of the batteries in the end product must be avoided. Reverse
insertion of batteries can cause charging, and that may result in leakage or explosion.
8 Remove batteries from this product if you store the product over 30 days because the batteries
could leak and damage the product.
9 Discard 'dead' batteries as soon as possible since 'dead' batteries are more likely to leak in a
product. If a battery has leaked or vented, it should be replaced immediately using protective
gloves.
10 Do not store this product, or the batteries provided with or identified for use with this product,
in high-temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose
of extending shelf life should be protected from condensation during storage and defrosting.
Batteries should be stabilized at room temperature prior to use after cold storage.
11 If your product uses rechargeable batteries, charge the batteries only in accordance with the
instructions and limitations specified in the user manual.
12 There is a risk of explosion if batteries are replaced with an incorrect type. For the parent
unit, always use the SCD510 NiMh rechargeable battery pack supplied with the appliance.
SaVE ThESE inSTrUCTiOnS
CaUTiOn: ThE SYMBOl ShOWn in FigUrE 1 MEanS ThaT ThErE iS a
-
riSK OF EXplOSiOn OF ThE BaTTEriES anD/Or OF SEriOUS DaMagE
TO ThE BaBY MOniTOr iF ThE BaTTEriES Or ThE aDapTEr arE
rEplaCED WiTh an inCOrrECT TYpE (Fig. 1).
-
ThE SYMBOl ShOWn in FigUrE 2 inDiCaTES, FOr ThE SaFETY OF
EVErYOnE in YOUr hOUSEhOlD, ThaT UninSUlaTED MaTErial
WiThin YOUr prODUCT MaY CaUSE an ElECTriCal ShOCK. EXCEpT
FOr ThE BaTTErY COMparTMEnT, plEaSE DO nOT OpEn ThE
hOUSing OF ThE BaBY UniT anD parEnT UniT in OrDEr TO prEVEnT
ElECTriC ShOCK (Fig. 2).
TO prEVEnT STrangUlaTiOn WiThThE pOWEr COrD, alWaYS KEEp
-
ThE BaBY UniT anD ThE pOWEr COrD OUT OF BaBY'S rEaCh, aT
lEaST 1 METEr/3.5 FEET aWaY. DO nOT USE EXTEnSiOn COrDS.
Adapter for baby unit:
-
Input: 100-240VAC 50-60Hz
-
Output: 7.5 VDC 400 mA
-
Adapter no. S004LU0750040
EngliSh
7