REWIND (MCS)
Status
Data Bytes
F0H
7FH,Dev,06H,05H
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (or 7FH)
06H
MMC Command Message
05H
REWIND (MCS)
F7H
EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving
device or 7FH, the VS-840 goes into the rewind condition.
The VS-840 does not transmit the message.
RECORD STROBE
Status
Data Bytes
F0H
7FH,Dev,06H,06H
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (or 7FH)
06H
MMC Command Message
06H
RECORD STROBE
F7H
EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving
device or 7FH, the VS-840 goes into the following condition.
1. The VS-840 is in the playback condition.
Start Recording the tracks that status are the record standby mode.
2. The VS-840 is in the stop condition.
Start Playing back, and Start Recording the track that status are the
record standby mode.
If the transport switch [REC] was pressed out of the recording condition,
the VS-840 transmits as the device ID 7FH.
RECORD EXIT
Status
Data Bytes
F0H
7FH,Dev,06H,07H
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (or 7FH)
06H
MMC Command Message
07H
RECORD EXIT
F7H
EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving
device or 7FH, the VS-840 exits from the record condition.
If the transport switch [REC] was pressed while recording, the VS-840
transmits as the device ID 7FH.
MMC RESET
Status
Data Bytes
F0H
7FH,Dev,06H,0DH
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (or 7FH)
06H
MMC Command Message
0DH
MMC RESET
F7H
EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving
device or 7FH, the VS-840 resets all communication channels related
with MMC.
When powered on the VS-840 transmits as the device ID 7FH.
172
Status
F7H
Status
F7H
Status
F7H
Status
F7H
WRITE
Status
Data Bytes
F0H
7FH,Dev,06H,40H,ccH,ddH,eeH,,,ffH,,,
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (or 7FH)
06H
MMC Command Message
40H
WRITE
ccH
Information Bytes follows the command
ddH
The name of the writable Information Field
eeH
Information Field Format
:
:
ffH
Field names and data
:
:
F7H
EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving
device or 7FH, the VS-840 writes the data to the specified infomation
field.
The VS-840 does not transmit the message.
MASKED WRITE
Status
Data Bytes
F0H
7FH,Dev,06H,41H,04H,ddH,eeH,ffH,ggH
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (or 7FH)
06H
MMC Command Message
41H
MASKED WRITE
04H
Number of Bytes follows the command
ddH
The name of the masked type writable Information Field
eeH
Byte number to write in the Bit Map
ffH
Bit location of the bit map byte to change
ggH
New data to write to the specified bit map byte
F7H
EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving
device or 7FH, the VS-840 writes the data to the specified bit map byte.
The VS-840 does not transmit the message.
LOCATE (MCP)
Format 1 - LOCATE[I/F]
Status
Data Bytes
F0H
7FH,Dev,06H,44H,02H,00H,nnH
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (or 7FH)
06H
MMC Command Message
44H
LOCATE(MCP)
02H
Number of Bytes
00H
"I/F" sub command
nnH
Information Field
08H, 09H, 0AH, 0BH, 0CH, 0DH, 0EH, 0FH)
F7H
EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving
device or 7FH, the VS-840 locates the selected time location stored to the
specified information field.
The VS-840 does not transmit the message.
Status
F7H
Status
F7H
Status
F7H