Silk’n Lipo H5001 Manual Del Usuario página 15

4.3 Energy levels
Silk'n Lipo has multiple levels of Electrical Muscle Stimulation (EMS). This gives you
excellent control of the intensity of muscle stimulation you wish to use for each
part of the body you treat. What's more, you can change levels as often as you like
during a treatment.
U
To increase the EMS level: Short press the + button as many times as
you need to set to the EMS level that is comfortable for you. You will see
that the operating light blinks more quickly as you increase the EMS level.
U
To reduce the EMS level: Short press the - button as many times as you
need (see section "4.2 Controls and settings").
U
To set the EMS level back to zero: Long press the - button.
You can only change EMS levels when the treatment unit is in good
a
contact with your skin. When there is no contact with the skin, the EMS
drops to zero.
4.4 Wetting the electrode pads
The electrode pads are required for the EMS to work, and they must be wet
before you start your treatment.
Wet each electrode pad with a wet cloth or with wet fingers.
1.
Then place the wet electrode pad onto the back of each treatment
2.
unit. Make sure that it fits firmly around the center rectangle. You might
need to manipulate it slightly, so that the electrode pad lies flat on top of
the treatment unit.
Electrode pad
It is important that you only wet the electrode pad, and not the whole
a
treatment unit.
13
Underside of the
treatment unit
EN