Reset The Day's Piece Quantity; Changing Operating Mode; Displaying Counters And Processing Times; Set Language - Weidmuller Crimpfix R Vario Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
Operating the machine
Only menus 1-4 and 10 are relevant for operation.
Here you can:
Selection menu (Menu 1): Select the cross section, reset
the day's piece quantity
Menu 2: Reset the day's piece quantity
Menu 3: Change operating mode (standard: crimping and
stripping)
Menu 4: Show operating data
Menu 10: Set language
The remaining menus are only intended for servicing.

6.5 Reset the day's piece quantity

► Select Menu 2.
2. Production menu
Ready
Device is ready for operation
DPQ
5
Day's piece quantity: Quantity of
processed pieces since the last
reset.
Step: 1/0
C
E
► To reset the day's piece quantity, hold down C for at
least 5 seconds.
The day's piece quantity is reset to zero.
► To return to the selection menu, press C.

6.6 Changing operating mode

► Select Menu 3.
The current operating mode is displayed.
3. Stripping menu
Stripping:
0
0 = Stripping and crimping
1 = Only stripping
C
E
► To switch operating mode, press E.
The selected operating mode is immediately active.
► To return to the selection menu, press C, or choose an-
other menu with the arrow keys.
36
6.7 Displaying counters and processing
times
► Select Menu 4.
4. Operating data
menu
Tcounter:
400002
Total counter: Number of com-
pleted work cycles
Pr.Time:
1,946s Processing time: Work cycle du-
ration (stripping and crimping)
Service: –
1
Prefix sign and service counter
C
E
The total counter counts the work cycles during the entire
lifetime of the machine. The service interval of the machine
is 400,000 work cycles. The service counter counts down
instead of up; starting at 400,000. Once 400,000 work cy-
cles have been completed, the service counter stands at 0.
When the machine is next started, the service notification
is displayed (see section 6.9). The service counter counts
up again. The negative prefix sign indicates that a counting
cycle has been completed. The service technician resets
the service counter to 400,000.

6.8 Set language

► Select Menu 10.
► To activate the menu, press E.
10. Language
---------------------------
C
E
► Press  until the desired language is displayed.
The selected language is adopted immediately.
► To eturn to the selection menu, press C, or choose an-
other menu with the arrow keys.

6.9 Service display

2. Production menu
Ready
Device is ready for operation
––– Service –––
Service display appears after
every 400,000 work cycles.
Step: 2/0
C
E
2583060000/00/03.2018
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

2580000000

Tabla de contenido