Proper Use Of The Product; Scope Of Delivery; Specifications; Tow Bar Requirements - EUFAB AMBER 1 Manual De Instrucciones

Bicycle rack „AMBER I" for trailer tow bar
CONTENTS
1. PROPER USE OF THE PRODUCT _____________________________________________________________ 8
2. SCOPE OF DELIVERY ____________________________________________________________________ 8
3. SPECIFICATIONS ______________________________________________________________________ 8
4. TOW BAR REQUIREMENTS ________________________________________________________________ 8
5.
SAFETY PRECAUTIONS __________________________________________________________________ 9
6. OPERATING INSTRUCTIONS _______________________________________________________________ 10
6.1 MOUNTING THE BICYCLE RACK _____________________________________________________________ 10
6.1.1 MOUNTING THE WHEEL RAILS _____________________________________________________________ 10
6.1.2 MOUNTING THE LAMP MOUNT _____________________________________________________________ 10
6.1.3 MOUNTING THE U-BRACKET _______________________________________________________________ 10
6.1.4 MOUNTING THE FRAME HOLDER ____________________________________________________________ 11
6.1.5 MOUNTING THE LICENSE PLATE HOLDER _______________________________________________________ 11
6.1.6 LAYING THE ELECTRICAL CABLES ___________________________________________________________ 11
6.1.7 MOUNTING THE SHORT TENSIONING STRAP _____________________________________________________ 11
6.1.8 MOUNTING THE PLASTIC COVER ____________________________________________________________ 11
6.2 MOUNTING THE BICYCLE RACK ON THE TRAILER TOW BAR ____________________________________________ 12
6.3 MOUNTING THE BICYCLE TO THE BICYCLE RACK ___________________________________________________ 12
7. MAINTENANCE AND CARE ________________________________________________________________ 13
8. NOTES REGARDING ENVIRONMENTAL PROTECTION ________________________________________________ 13
9. CONTACT INFORMATION _________________________________________________________________ 13
WARNING!
Please read the operating instructions carefully prior to use and observe all safety instructions!
Non-compliance can lead to personal injuries, damage to the device or your property!
Please retain the original packaging, the proof of purchase as well as these instructions for subsequent reference!
When passing on the product, please include these operating instructions as well.
Please check content of package for integrity and completeness prior to use!

1. PROPER USE OF THE PRODUCT

This bicycle rack is mounted to the trailer tow bar of a car and is designed for the transportation of one bicycle.
This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required
specialist knowledge. Keep children away from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the observance of all information in these operating instructions, particularly the
observance of the safety notes. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damage or
personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.

2. SCOPE OF DELIVERY

1 x Base frame
2 x Wheel rail halves
1 x Lamp mount set
1 x U-bracket
1 x Frame holder, short
1 x Plastic cover
3 x Tensioning strap, short
1 x Safety strap

3. SPECIFICATIONS

Weight: 9.5 kg Electrical connection:
Payload: 30 kg D-value:

4. TOW BAR REQUIREMENTS

• The trailer tow bar must be approved in its construction.
• Ball and ball rod must have been forged in one piece.
• Only mount the bicycle rack to a tow bar of steel St52, grey cast iron GGG52 or higher quality.
• The D-value of the tow bar ball must be at least 7.6 kN
• Never mount the rack to a tow bar made of aluminium, other light metals or plastic
8
1 x License plate holder
1 x Operating instructions
1 x Permit
1 x Padlock with key
4 x Lock screw M6 x 50
4 x Washer 17.8 x 6.5 x 1.1
4 x Nut M6
1 x Cross-headed screw M5 x 12
13-pin
7.6 kN
1 x Washer 9.8 x 5.4 x 0.9
2 x Cross-headed screw M5 x 35
2 x Spring washer 8.1 x 5.5 x 1.2
2 x Washer 9.7 x 5.3 x 0.9
[mm] 2 x Lock screw M8 x 60
[mm] 2 x Washer 15.8 x 8.5 x 1.1
2 x Knob nut M8
[mm] Cable ties
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]