SEVERIN KS9807 Instrucciones De Uso página 14

Ocultar thumbs Ver también para KS9807:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
on the right. Ensure that the cover is firmly pushed
down into the hole.
6. Pull out the two bolts (7) which hold the lower
right hinge plate (4) and the adjustable foot (6) in
position.
7. Remove the adjustable foot (8) on the left and
insert it into the corresponding thread on the
right.
8. Install the lower hinge plate (4) with the two bolts
(7) on the left.
9. Replace the door in its new position. Ensure that
the hinge pin is inserted into the guide bushing
(hole) on the lower part.
10. Install the upper hinge (3) on the left-hand side.
Ensure that the hinge pin is inserted into the guide
bushing (hole) on the upper part.
11. Replace the cover (5) in the corresponding holes on the right.
12. Replace the hinge cover (1) on the upper hinge.
13. Put the unit back in its intended position and wait for about two hours before connecting it to
the mains.
Temperature control
The unit is activated by connecting it to the mains. It is only switched off completely when the plug is
removed from the wall socket.
The temperature in the refrigerator cabinet can be adjusted by setting the temperature control.
Temperature settings from 1 – 5 are available.
1
The cooling function is switched off; however, the appliance is still connected to the mains. To
switch off the unit completely, the plug must be removed from the wall socket.
3
For long-term food storage, the temperature control should be set to the intermediate position.
5
This position is used for freezing fresh food. Once the food to be frozen has reached the required
deep-freeze temperature, the temperature control can be re-set to an intermediate position.
We recommend setting the control initially to position 3. After a certain time, the actual temperature
should then be checked with a thermometer, and adjustments made if necessary.
Note: The operating temperature in the freezer largely depends on factors such as the ambient
temperature and that of the food to be newly frozen. It also depends on how often the door is opened
and how long it remains open. If necessary, the temperature control setting may be adjusted
accordingly.
Following a power interruption, or if the unit has been switched off on purpose, it may take 3 to 5
minutes before it switches on again.
Freezing and storing food
With an operating temperature of –18°C and below, the freezer can be used to store frozen or
pre-frozen food for several months, to make ice cubes and to freeze fresh food.
To ensure that nutritious elements such as vitamins are not lost, fresh food should be deep-
frozen right through as quickly as possible. To that effect, the prepared food should be placed
14
Tabla de contenido
loading

Tabla de contenido