Instructions For Use; Technical Specifications - Beurer BC 30 Manual De Instrucciones

• If you store the device and cuff, do not place heavy objects
on the device and cuff. Remove the batteries.

10. Technical specifications

Model no. BC 30
Type BC 30/1
Measurement Oscillometric, non-invasive blood pres-
method sure measurement on the wrist
Measurement Cuff pressure 0-300 mmHg,
range systolic 50-250 mmHg,
diastolic 30-200 mmHg,
pulse 40-180 beats /minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
systolic 8 mmHg / diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 70 mm x W 72 mm x H 27.5 mm
Weight Approximately 105 g (without batteries)
Cuff size 135 to 195 mm
Permissible operat- +10 °C to +40 °C, 30-85 % relative hu-
ing conditions midity (non-condensing)
Permissible storage -20 °C to +60 °C, 10-95 % relative hu-
conditions midity, 700-1050 hPa ambient pressure
Power supply 2 x 1.5 V
Battery life For approx. 300 measurements,
depending on levels of blood pressure
and pump pressure
Accessories Instructions for use, 2 x 1.5 V AAA bat-
teries, storage box
Classification Internal supply, IPX0, no AP or APG,
continuous operation, application part
type BF
• This unit is in line with European Standard EN 60601-1-2 and
is subject to particular precautions with regard to electro-
magnetic compatibility (EMC). Please note that portable and
mobile HF communication systems may interfere with this
unit. More details can be requested from the stated Customer
Services address or found at the end of the instructions for
use.
• This device is in line with the EU Medical Devices Directive
93/42/EEC, the "Medizinproduktegesetz" (German Medi-
cal Devices Act) and the standards EN 1060-1 (non-inva-
sive sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part3: Sup-
plementary requirements for electro-mechanical blood pres-
sure measuring systems) and IEC 80601-2-30 (Medical elec-
trical equipment – Part 2-30: Particular requirements for the
safety and essential performance of automated non-invasive
blood pressure monitors).
22
AAA batteries