Toyota TPA800 Manual Del Propietário página 11

1. The sensor is not working even though an obstacle is present
Front Sensors
Is the ignition switch "ON"?
Is the green LED on the dashboard
switched "ON"?
Please consult your installer
Rear Sensors
Is the ignition switch "ON"?
Is the shift lever still in "R" (reverse)?
Is the cancellation switch (optional)
"ON"?
Please consult your installer
2. The beeper is constantly ON or is emitting a continual fast
intermittent beep
Is the vehicle pulling a trailer?
Is there any debris, mud, snow, ice, dirt,
etc. on the sensing portion of the
sensor?
Are there any obstacles nearby?
Please consult your installer
3. The beeper is emitting a continual intermittent tone with
long beeps and short pauses
There is a problem with the connection of the sensors. Please contact your installer
(*) "Installer" means authorized Toyota dealer or repair agent or other appropriately qualified and equipped expert.
10 Toyota Parking Aid 800
YES
YES
(*) .
YES
YES
YES
(*) .
NO
NO
NO
.
(*)
NO
Turn "ON" the ignition switch.
NO
Switch "ON" front sensors as described
in "C. Operation Procedure".
NO
Turn "ON" the ignition switch.
NO
Shift the lever to the "R" (reverse)
position.
NO
Turn the cancellation switch (optional)
to "ON" mode.
YES
Turn the cancellation switch (optional)
to "OFF" mode.
YES
Remove the debris.
YES
Remove the obstacle or move the
vehicle.
GB
(*) .