Care And Maintenance - Hilti SFE 2-A12 Manual De Instrucciones

2. Release the control switch.
➥ The power tool switches off.
6.5 Screwdriving
1. Set the torque. → page 28
2. Set the direction of rotation to forward (clockwise) or reverse (counter-
clockwise). → page 28
3. Press the control switch. → page 28
6.6 Drilling
1. Set the torque setting ring to the
2. Set the direction of rotation to forward (clockwise). → page 28
3. Press the control switch. → page 28
7

Care and maintenance

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals
and make sure that they all function correctly.
• Do not operate the product if signs of damage are found or if parts
malfunction. Have it repaired immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and
check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Store or online at: www.hilti.group.
*2236948*
Printed: 07.08.2019 | Doc-Nr: PUB / 5507949 / 000 / 00
symbol.
2236948 English 29