Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fuba
Rename Channels
To rename a channel, press the BLUE button (
through the alpha-numeric keys on the remote control and the functions available on screen on the input window. Then
OK
press the YELLOW (
) to confirm. Press EXIT to exit and save the changes.
Delete Channels
To remove a channel from the list, press the BLUE button (
channel from the list and press OK. Press EXIT to exit and save the changes.
NOTE
The deleted cleared will be reloaded on the list following an update channels or a reinstallation of the entire channel list
(section. 3.3).
3.2.2 Delete All
Utility to delete all channels.
3.3 Installation menu
During the first installation an automatic channel scan of the available channels is performed. Periodically, upon
activation of new television and radio services or modifications by broadcasters, we suggested that you reinstall or
update the channel list of the receiver.
3.3.1 Channel Scan
Manual scan function on a single frequency. Select the channel/frequency (item
to execute the search.
3.3.2 Automatic search
Channel scan function on all available frequencies:
1.
Country:
Definition of the country in which the receiver will be installed.
WARNING
The incorrect setting of the Country may result in a partial or even a failure to identify and save channels.
2.
FTA Only
: possible restrictions of scanning only for broadcast in the clear/free (Yes) or (No).
Search
3.
: Press OK on this menu item to reinstall the whole channel list.
WARNING
When you do this, previous channel list will be cleared.
3.3.3 Autoscan in Standby
Function dedicated to the configuration of the automatic channel list Update during standby mode. It can be
enabled/disabled using the parameter
buttons 0÷9 on the remote control at a new time (
3.4 System Setup menu
3.4.1 Language
The following items are available:
Language
1.
: language of the menu shown on the screen (On Screen Display - OSD).
First Audio
2.
: Main audio language for the TV programs.
3.
Second Audio
: Secondary audio language for TV programs, to be used in the absence of the main one.
4.
Subtitle language
: language subtitles for TV shows.
NOTE
The proper functioning of the receiver in relation to the above audio and subtitle preferences is conditioned by the
presence of this information which is transmitted at the discretion of the broadcasters of the channel you are tuned in to.
3.4.2 TV System
This menu has the following audio and video settings to be adjusted in accordance with the characteristics of the
audio/video devices plugged into the receiver:
Video resolution
1.
: setting of the video resolution of the HDMI digital audio and video output.
10
Edit
) and then the GREEN button (
Edit
Autoscan in Standby
On
(
hh
mm
:
) at the
Edit
), then again the BLUE button (
Channel No.
Off
/
) and also programmed by entering with the number
Autoscan in Standby Time
), then type in the new name
Delete
), highlight the
), then press OK on Search
parameter.
Capítulos
Tabla de contenido
Solución de problemas
