Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. - USING THE THERMAL RADIATOR
Daily Programming:
Temperature level for each
time interval (1h) of the day.
Temperature setpoint.
Operating mode.
OK / Mode Key
Press the key to select operation
mode: Auto, Manual, Off, and to
set the value of the different
parameters.
GREEN BACKLIGHT
Pressing any key the display will illuminate with a soft green colour. After certain time if no keys are pushed the display backlight
will turn off.
OPERATING MODES
The heater has three different operation modes that may be selected by pressing the OK/Mode button, these are: Auto,
Manual override and OFF.
AUTO
3.1. ON/OFF
Once the heater is connected to a main supply you can turn the heater ON by switching the main ON/OFF switch positioned at
the rear right side of the heater as shown above.
Main switch.
All models are
equipped with one
switch on the back
surface allowing the
heater disconnection.
G-Control Hub
connection indicator.
Heating on indicator.
Current set point
temperature in AUTO
mode.
Config / Prog Key
Press the key to programme and
configure the thermal radiator in
AUTO Mode.
MANUAL override
13
OFF
EN
Tabla de contenido
