Clean the exterior of device with a dry cloth.
Do not use cleaning fl uids so as to avoid caus-
ing damage to electronic components.
Clean the lens (objective and eyepiece) only
with the cloth supplied or some other soft
lint-free cloth (e.g. micro-fi bre). Do not use
excessive pressure - this may scratch the
lens.
Protect the device from dust and moisture.
Store the device in the bag supplied or in
its original packaging. Batteries should be
removed from the device if it is not going to be
used for a long period of time.
General:
RISK of material damage!
Never take the device apart. Please
consult your dealer if there are any
defects. The dealer will contact our service
centre and send the device in for repair if
needed.
Do not subject the device to temperatures ex-
ceeding 60 C.
DISPOSAL
Dispose of the packaging material/s as
legally required. Consult the local au-
thority on the matter if necessary.
Do not dispose of electrical equipment
in your ordinary refuse. The European
guideline 2002/96/EU on Electronic
and Electrical Equipment Waste and relevant
laws applying to it require such used equip-
ment to be separately collected and recycled
in an environment-friendly manner. Empty bat-
teries and accumulators must be disposed of
separately. Information on disposing of all
such equipment made after 01 June 2006
can be obtained from your local authority.
Declaration of Conformity
Product Type:
Microscope
Product Name:
TeleMicro Set
Article No.:
88-40101
Bresser GmbH declares that the
above-named product corresponds
to the following directives and relevant stan-
dards in its conception and design as well in
the version marketed by us.
Directive:
Harmonized Standards:
EN 55014-1
2004/108/EC
EN 55014-2
This declaration is no longer valid in the event
of a change to the product which has not
been coordinated with us.
Bresser GmbH
Gutenbergstr. 2, D-46414 Rhede, Germany
Rhede, 23.03.2011
Helmut Ebbert
Managing Director
GB
11