Using The Kettle; Descaling The Appliance - Princess 232001 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Boil twice a cup of water to clean your kettle before using it for the first time. Empty the water reservoir,
and then wipe the outside of the kettle with a damp cloth.
FEATURES
1. Top lid
2. Water volume dial
3. ON button
4. Stop button
5. Spout
6. Drip tray plate
7. Removable drip tray
8. Lid release button
9. Handle
10. Water reservoir
11. Base
MOUNTING
Place the base on a flat and stable surface. Mount the drip tray onto the projection of the base.
Mount the kettle body onto the base. Make sure the spout and the drip tray are on the same side.

USING THE KETTLE

The kettle should be used exclusively for boiling water; never use it with other liquids or ingredients.
Push the lid release button to open the top lid.
Always fill the water reservoir between the minimum and maximum level markers. Always remove the
kettle body when filling it to avoid water dripping into the base.
Close the top lid and replace the kettle body onto the base.
Place your cup on the drip tray. Make sure it aligns with the spout.
Turn the water volume dial to set the volume of water you desire. The water volume can be adjusted.
Make sure to place a big enough cup on the drip tray to collect the hot water.
Switch the kettle on by pressing the ON button. The indicator light will light up. Once the water boils, it
is dispensed from the spout and the ON button automatically switches to the off position. You can press
the stop button to stop the process.
If the appliance is accidentally switched on when empty, the boil-dry protection will automatically switch it off
again. Adding water will then cool the boil-dry protection mechanism enabling you to use the kettle as normal.
NOTE:
- Do not remove the kettle body from the base until it has switched off automatically or you have
switched it off yourself first.
- Always make sure that the water level is between the minimum level marker and the maximum level
marker. If the water level is below the minimum level marker, the kettle will boil dry. Do not fill the
water reservoir higher than the MAX level indicator.
- The kettle can only be used in combination with the accompanying base.
- The cord should be completely unrolled and not left coiled around the base.
CLEANING
FIRST REMOVE THE PLUG FROM THE SOCKET AND ALLOW THE KETTLE TO COOL.
The outside of the kettle can be wiped down with a damp cloth. The base should always be cleaned
without water. The drip tray can be washed with soapy water.

DESCALING THE APPLIANCE

The appliance must be descaled every month. Use a suitable descaling agent for descaling.
Special descaling agents are available from our service unit.
Note: Princess will not be responsible for any damage caused by descaling agents. Damage
caused by not regularly descaling the appliance is not covered under the guarantee.
WARNING!
- Before descaling the appliance, always switch off the appliance, remove the mains plug
from the wall socket and wait until the appliance has cooled down.
- Do not immerse the appliance in water or any other liquid.
6
Tabla de contenido
loading

Tabla de contenido