Logmask - Device Log Mask; Lvl - Level; Lvlreport - Level Report; Lvlreporten - Level Report Enable - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

loGmasK – Device Log Mask
This command sets or reports the device event log mask.
Command Form: DEVICE loGmasK [Value]
argument Type
Value Hexadecimal
lvl – Level
This command reports the level of a channel. This command is read only.
Command Form: DEVICE lvl <Channel> <Group> <position> [Value]
argument Type
Channel Channel
Group Group
position meter Type
Value Signed Float
lvlRepoRT – Level Report
This command selects/reports the status of level reporting for the specified channel.
Command Form: DEVICE lvlRepoRT <Channel> <Group> <position> [Value]
argument Type
Channel Channel
Group Group
position meter Type
Value unsigned integer
lvlRepoRTen – Level Report Enable
enables level reporting for the unit.
Command Form: DEVICE lvlRepoRTen [Value]
argument Type
Value unsigned integer
228 Technical Services: 800-283-5936
size values
4 x x x x x x x x x x x x x x x x
| | | | | | | | | | | | | | | | reset
| | | | | | | | | | | | | | | errors
| | | | | | | | | | | | | | password Access
| | | | | | | | | | | | | Telco on/off
| | | | | | | | | | | | dial
| | | | | | | | | | | Call duration
| | | | | | | | | | System Checks
| | | | | | | | | (reserved)
| | | | | | | | (reserved)
| | | | | | | default
(null to query in text)
size values
1 See Groups and channels
1 1, 2, 3, 5, 7, 12, 16, 17, 20
(i, o, m, p , l, F, T, r, B)
2 See meter Type definitions
4 -99.99 – 99.99
(Sent with null in text, Value returned)
size values
1 See Groups and channels
1 1, 2, 3, 5, 7, 12, 16, 17
(i, o, m, p , l, F, T, r)
2 See meter Type definitions
4 0 = off (delete from list being reported)
1 = on (Add to list being reported)
2 = Toggle
(null to query in text)
size values
4 0 = Turn off reporting but leave current list
1 = Turn on reporting
2 = Turn off reporting and clear the list
(null to query in text)
Units
Units
dB
Units
Units