Default - Default The Unit; Delay - Delay Adjust; Delaysel - Delay Select; Devicename - Argument Identification Label - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

deFaUlT – Default The Unit
Sets the unit to factory defaults. There is no query for this command.
Command Form: DEVICE deFaUlT
no arguments
delay – Delay Adjust
This command selects/reports the setting of delay time.
Command Form: DEVICE delay <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned Float
delaysel – Delay Select
This command selects/reports the delay activation of an assignable processing channel.
Command Form: DEVICE delaysel <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
devicename – Argument Identification Label
This selects/reports the device Argument identification label of the specific channel.
: DEVICE devicename <Channel> <Group> [Value]
CommanD Form
argument Type
Channel Channel
Group Group
reserved unsigned integer
label String
devicesUbType – Sets the Subtype of a Connected Device
This command enables/disables or reports the current type of device connected to an input or output.
Command Form: DEVICE devicesUbType <Channel> <Group> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
size values
1 See Groups and channels
1 5 (p)
2 0.00 – 250.00
(null to query in text)
size values
1 See Groups and channels
1 5 (p)
2 0 = off
1 = on
2 = Toggle
(null to query in text)
size values
1 See Groups and channels
1 1, 2, 3, 7
(i, o, m, l)
2 0
12 1 – 12 characters
CleAr = clear the label
(null to query in text)
size values
1 See Groups and channels
1 1, 2, 3, 7 (i, o, m, l)
2 (null to query in text)
Units
ms
Units
Units
Units
Appendix A: Serial Commands 217