Aconnlvl - Audible Connect / Disconnect Level; Ad - Auto Disconnect Enable / Disable; Adclip - Audio Clipping - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

aconnlvl – Audible Connect / Disconnect Level
This command selects/reports the audible connect / disconnect indicator's level.
Command Form: DEVICE aconnlvl <Channel> [Value]
argument Type
Channel Channel
Group Group
Value Signed Float
ad – Auto Disconnect Enable / Disable
This command selects/reports the setting of auto disconnect.
Command Form: DEVICE ad <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
adclip – Audio Clipping
This command reports the channels that are currently clipping their audio signals. This command is read only.
This command is implemented only for inputs.
Command Form: DEVICE adclip [Values]
argument Type
Value Bit map of
inputs
Bit map of
outputs
Bit map of
processors
Bit map of
Faders
Bit map of Telco 1
size values
1 See Groups and channels
1 17 (r)
2 -12.00 – 12.00
(null to query in text)
size values
1 See Groups and channels
1 17 (r)
2 0 = off
1 = loop drop
2 = Call progress
3 = loop drop + Call progress
(null to query in text)
size values
2 xxxx xxxx xxxx xxxx
|........................| input 1 (lsb) to 12 (msb)
|.......| reserved
(null to query in text)
2 xxxx xxxx xxxx xxxx
|...........................| output 1 (lsb) to 13 (msb)
|....| reserved
2 xxxx xxxx xxxx xxxx
|...............| processor A (lsb) to H (msb)
|--------------| reserved
1 xxxx xxxx
|------| Faders 1 (lsb) to 4 (msb)
|-------| reserved
xxxx xxxx
| Telco rx
| Telco Tx
|-----------| reserved
Units
dB
Units
Appendix A: Serial Commands 211