Cardin Elettronica PRG/X Manual Del Usuario página 6

2
Extracting the appliance support
Unscrew the six fastening screws and care-
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
fully extract the appliance support. Store it
temporarily in a safe place, protected from
dust and possible knocks and bangs.
3
Description: Installazione PRG/X
DM0857
Scattola (estrazione scheda)
PRG/X
Date : 03-09-2012
Air circulation slits
By default the air circulation slits are in the
'closed' position'. If you wish to activate air
circulation, unscrew the grey plaques (det. 1)
and rotate them to the 'open' position (det.
3) before fastening the container to the wall.
DM0858
PRG/X
2
x4
2
3
4
2
Description: Installazione PRG/X
Scattola (PASSAGGIO ARIA)
x8
1
Fitting the optional fan
The application of an optional fan should
be only be considered by the installer after
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
having considered the thermal condition of
the installation site. Open the air circulation
slits (point 3) and fasten the ventola into its
slot on the base.
Drawing number :
DM0859
Product Code : PRG/X
Date :
Draft : P.J.Heath 03-09-2012
1
CARDIN ELETTRONICA S.p.A - 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
5
x4
Opening the fastening holes
Place the cover upside down on a work bench
then open the four fastening holes as shown in
the drawing using a screwdriver of similar tool.
6
Drawing number :
DM0867
Description: Installazione PRG/X
Scattola (FISSAGGIO VENTOLA)
Description: Installazione PRG/X variante
4
1
x4
2
5
x4