Important Remarks; General Description - Cardin Elettronica PRG/X Manual Del Usuario

Ocultar thumbs

Contenido

página de 21

/ 21
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

• The use and installation of these appliances must rigorously respect the indications supplied by the

manufacturer. The manufacturer accepts no liability for damage caused by, or situations arising from, the

improper use of these appliances.

Attention! Only for EU customers - WEEE marking.

This symbol indicates that once the products life-span has expired it must be disposed of separately from

other rubbish. The user is therefore obliged to either take the product to a suitable differential collection site for

electronic and electrical goods or to send it back to the manufacturer if the intention is to replace it with a new

equivalent version of the same product.

Suitable differential collection, environmental friendly treatment and disposal contributes to avoiding negative effects on

the ambient and consequently health as well as favouring the recycling of materials. Illicitly disposing of this product by

the owner is punishable by law and will be dealt with according to the laws and standards of the individual member nation.

General description

- All weather container in ABS with a door sealing gasket

- Cover closing system using rapid action hooks.

- Container fitted with wall fastening elements

- Removable plaque factory set for the fastening of up

to five cable clamps.

- Air circulation slits built into the container.

- Removable support in nylon fibre housing the electronic

appliances.

- The container is supplied with one Ø21 mm cable

clamp and two Ø16 mm cable clamps.

- A ventilation fan can be fitted on request

- Protection grade IP55.

- Fireproofing grade UL94V2.

Positioning

Depending on the type of installation, work out the position

in which the programmer will be situated remembering

that the site must be:

- a position safe from accidental collision;

- high enough above the ground to be safe from pools

of water;

- in a position which the technician can easily reach.

Container assembly

Opening the container

Unfasten the six spring loaded screws using

a flat nosed screwdriver (det. 1), rotating

the screws through 70° with respect to the

locked position. The hooks will loosen their

hold freeing the cover.

Remove the cover as shown in the drawing

(det. 2) and store it in a clean and secure

place.