JVC KD-X250BT Manual De Instrucciones página 21

Menu item
BEEP
(Keytouch tone)
AMP GAIN
(Amplifier gain)
CLOCK SET
CLOCK ADJ
(Clock
adjustment)
CLOCK DISP
(Clock display)
DIMMER SET
BRIGHTNESS
SCROLL *6
TAG DISPLAY
SSM
AREA
(Frequency
tuning interval)
MONO
(Monaural mode)
IF BAND
(Intermediate
frequency band)
RADIO TIMER
*5
The illumination control wire connection is required. (
*6 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Selectable setting (Initial: [XX])
[ON]/OFF: Activates or deactivates the keypress tone.
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]: The maximum volume level is 50.
For settings, page 4.
[AUTO]: The built-in clock is synchronized with the Clock Time (CT) data
received from the FM Radio Broadcast Data System station.
OFF: Cancels.
ON/[OFF]: Activates or deactivates clock display when the unit is turned
off.
Selects the display and button illumination adjusted in the <BRIGHTNESS>
setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *5
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
DAY[31]/NIGHT[15]: Brightness settings for the display and button
illumination for day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
[ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
[ON]: Shows the TAG information while playing MP3/WMA tracks.
OFF: Cancels.
For settings, page 6. (Displayed only when the source is "FM".)
[AREA US]: For North/Central/South America, AM/FM intervals: 10 kHz/200 kHz.
AREA EU: For any other areas, AM/FM intervals: 9 kHz/50 kHz.
AREA SA: For some South American countries, AM/FM intervals: 10 kHz/50 kHz.
Displayed only when the source is "FM".
[OFF]: Enables stereo FM reception.
ON: Improves the FM reception but stereo effect will be lost.
[AUTO]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
For settings, page 7.
Menu operations
page 31)
ENGLISH | 21