Using Voice Recognition - JVC KD-X250BT Manual De Instrucciones

Bluetooth mobile phone
Making a call from memory
You can store up to 6 contacts in the memory of
this unit for speed dialing.
To store contacts in memory
1 Enter the hands-free menu.
2 Select a call method.
3 Select a contact (name/phone number).
Name
4 Store in memory.
(Hold)
"MEMORY PX" flashes. The contact is stored to the
selected number button (1 - 6).
To erase a contact from preset memory, select
<DIAL NUMBER> in step 2 and store a blank
number.
To make a call from memory
1 Enter the hands-free menu.
2 Select and call the contact.
"NO PRESET" appears if there are no contacts
stored in memory.

Using voice recognition

You can use the voice recognition features of the
connected phone through this unit.
"NOT SUPPORT" appears if the connected
phone does not support this feature.
1 Enter voice recognition mode.
If only one phone is connected,
(Hold)
16 | ENGLISH
<RECENT CALL>/
<PHONEBOOK>/
<DIAL NUMBER>
Phone Number
or
If two phones are connected,
Enter "phone list"
(Hold)
2 When "VOICE CTRL" "[Device Name]"
scrolls on the display, speak the name of
the contact you want to call or the voice
command to control the phone functions.
Supported voice recognition features vary for
each phone. Please refer to the instruction
manual of the connected phone for details.
This unit also supports the intelligent personal
assistant function of iPhone.
Deleting a contact (name/
phone number)
Only when <P.BOOK SEL> is set to <PB IN UNIT>.
( page 17)
1 Enter the hands-free menu.
2 Select a call method.
3 Select the contact (name/phone number)
to be deleted.
Name
4 Enter "Delete Entries" menu.
(Hold)
5 Select <DELETE> or <DELETE ALL>.
DELETE Selected name/phone number
from step 3 is deleted.
DELETE All names/phone numbers from
ALL selected menu in step 2 are
deleted.
Select the desired phone
<RECENT CALL>/
<PHONEBOOK>
Phone Number
or