Speedlink POWERSTRIXX ULTRA 5.1 Manual De Instrucciones página 11

a) Connect the front and rear speakers in accordance with the colour
D
markings at the bottom of the subwoofer.
GB
b) Connect the centre speaker to the "Centre" output socket on the
back of the subwoofer.
F
Using cable A or B
c) Connect the cinch plugs to the stereo inputs ("Stereo Input"): "L"
E
(white) and "R" (red) and connect the other end of cable A or B to
your stereo source, such as a stereo system or stereo sound card.
I
Now proceed as described in points 5–7 of section 1.1.
2. Functions of the remote control
Button:
On/Standby
Source
Master (-/+)
Sub
Centre
Rear
3. How to fit or change batteries:
1. Using a screwdriver, remove the screw on the back of the remote
control (point 1 of diagram).
2. Before you remove the battery compartment, lay the remote control
on a suitable surface with function buttons pointing upwards
(point 2 of diagram). Pull out the battery compartment at the bottom
end of the remote control (point 3 of diagram). If there are no
Functions:
Switches the system to standby or active mode.
The system is not completely disconnected from
the power supply in this mode!
Changes between 2 connected sound sources
(stereo sound source / 5.1 sound source).
Controls the overall volume of the system
Controls the bass sound of the subwoofer
Controls the volume of the centre speaker
Controls the volume of the rear speakers
11
Fig.3