Speedlink POWERSTRIXX ULTRA 5.1 Manual De Instrucciones página 10

1.1 Connecting to a 5.1 sound source
To connect to a 5.1 sound source with cinch/RCA inputs, use cable A
for connection 3 (see illustration 1):
1. Connect the front and rear speakers in accordance with the colour
markings at the bottom of the subwoofer.
2. Connect the centre speaker (horizontal speaker) to the "Centre" out-
put socket on the bottom of the subwoofer.
3. Connect the cables to the input sockets "Front" (front speaker), "Rear"
(rear speaker), and "Sub/Cen" (subwoofer, centre speaker) and
connect the other ends to your 5.1 sound source (e.g. a DVD player,
decoder, etc.).
4. Insert the power cable of the subwoofer in a power outlet and switch
the system on with the main switch at the bottom of the subwoofer.
5. Now press the "On/Standby" button on the remote control to activate
the sound source; the LED on the front of the subwoofer lights blue.
6. Note: if there is no sound after connecting, press the "Source" button
once on the remote control, as the wrong sound source may be
activated.
1.2 Connecting to a 5.1 sound card
To connect to a 5.1 sound card with 3.5mm sockets, use the supplied
cable C. (see illustration 1)
1. Connect the front and rear speakers in accordance with the colour
markings at the bottom of the subwoofer.
2. Connect the centre speaker to the "Centre" output socket on the back
of the subwoofer.
3. Connect cable C to the "Front" input socket (front speakers), "Rear"
(rear speakers), and "Sub/Cen" (subwoofer, centre speaker) and
connect the other ends to the corresponding outputs for the rear,
centre and front channels of your 5.1 sound source.
4. Now proceed as described in points 5-7 of section 1.1.
Note: Since each sound card has a different design, the manual can only
give general information on how to connect to sound cards. If you have
problems connecting the 5.1 system to your sound card, refer to the
instructions for your sound card or contact the manufacturer.
1.3 Connecting to a stereo sound source
Note: When connecting to a stereo source, a stereo signal is not output
via center and rear speakers.
10
D
GB
F
E
I