Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The manual position now overrules the programme. Press re-
turn
if you wish to undo the manual position.
2
can not be operated until some 10 seconds after the latest
2
setting!
4.7 Setting ventilation mode's values
You can set a ventilation mode's value by yourself.
Perform the following actions for this (see
Press return
as many times as necessary to get to the
2
main screen
Press
. 'Main Menu' opens
1
Select 'Installer' by turning
Press
. 'Installer' opens
1
Turn
to select the desired appliance
1
Press
1
choice HRV appliance if only one appliance is connected)
Select 'Device settings' by turning
Press
. 'Device settings' opens
1
Take note!
Reduced)' refers to ventilation mode
Press
1
You can set debit 1 through 3 in the same manner as descri-
Take note! You cannot feed in a value, lower than
High).
4.8 Retrieving settings
You can retrieve the current settings from the Brink Air Control.
Press return
as many times as necessary to get to the
2
main screen
Press
. 'Main Menu' opens
1
Turn
to select the desired appliance
1
Press
1
choice HRV appliance if only one appliance is connected)
Select 'Device information' by turning
Press
. 'Device information' opens
1
Turn
to display the desired information
1
Take note! You can look at, but not change, the set-
tings via the info menu.
Return button
1
&
):
13
1
1
1
1
.
1
1
4.9 Factory settings connected device
A device has been connected to the Brink Air Control. It is
possible to set back all this device's settings to the factory set-
tings. Perform the following actions for this (see
Press return
2
main screen
Press
. 'Main Menu' opens
1
Select 'Installation Settings' by turning
Select 'Installer' by turning
Press
. 'Installer' opens
1
Select 'Factory setting' by turning
Press
1
. 'Factory setting' opens
Turn
to select the option 'yes'
1
Press
1
The settings are put back to the factory settings.
Selecting factory setting will restore all step numbers to
the original factory setting. All fault messages will be de-
leted as well
5 Maintenance
5.1 General maintenance
.
Careful! Clean the screen with a soft cloth.
Careful! Never apply water and/or (cleaning) liquid to
.
the screen.
.
should be cleaned or replaced when the text 'FILTER' appears
on the Brink Air Control's display (see
Consult the manual of the device connected to the Brink Air
button
1
Press return
to get to the main screen.
2
6 Dismantling
Warning! You are not permitted to dismantle the Brink
Air Control or parts of the Brink Air Control by yourself.
This may only be done by a maintenance mechanic
approved by Brink Climate Systems.
7 Repair
Warning! You are not permitted to open or repair the
Brink Air Control or parts of the Brink Air Control by
yourself. This may only be done by a maintenance
mechanic approved by Brink Climate Systems.
12
as many times as necessary to get to the
1
1
1
).
8
1
&
1
):
).
10
Capítulos
Tabla de contenido
