Troubleshooting - Battipav MAGIK Manual De Instrucciones

Battipav srl
DISPOSAL
When parts wear out or when the machine is finally
scrapped, waste disposal must be carried out in
compliance with the laws in force.
Electric Motor
Aluminium
Steel
Copper
Polyamide
Main Body
Steel
Polystyrene
Polyamide

TROUBLESHOOTING

HAVE YOUR TOOL REPAIRED BY A QUALIFIED PERSON
This electric tool complies with the relevant safety rules. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in considerable danger to the
user.
Fault
The machine does not function.
Machine is difficult to start.
W.E.E.E. IT08020000002803
The European Directive 2002/96/CE
arranges that in the event of scrapping
of electrical equipment, they must not
be disposed of city solid refusals but collected
separately, in order to optimize the level of recovery
and recycling of the materials and above all in order
to prevent damages to health and environment.
To comply with European Directive 2002/96/CE, all
AL
electrical equipments must be marked with crossed
AC
basket symbol.
CU
The packing of the machine will be disposed of in
accordance with the methods laid down by current
PA
legislation. For further information concerning
disposal of electrical equipment, please refer to
public administration service.
AC
PST
PA
Cause
The power supply cable is damaged
or not properly connected.
No voltage in the 230 V socket.
Switch is damaged.
Motor is under powered and gives off
unpleasant odour.
Diamond blade is bent due to improper
use.
Start capacitor is damaged.
Motor bearings are damaged.
Remedy
Press the plug firmly into the power
socket.
Have the 230 V socket checked.
Consult local dealer.
Consult local dealer.
Consult local dealer.
Consult local dealer.
Consult local dealer.
GB
21