Maintenance Schedule; Check Engine Oil Level; Storage - Active 4.0-Z Manual De Instrucciones

GB
ENGLISH
ENGINE (IN ORDER TO AVOID TROUBLES)
Regularly: it is important,in order to avoid engine overheating,
to remove dust and dirt from slots,from cylinder, cover and
fins using a brush or compressed air.

CHECK ENGINE OIL LEVEL

Check regularly the engine oil level.
- Put the engine on a level surface.
- Remove the oil gauge
- If the oil level is below the lower gauge level line refill with
the proper oil up to the upper level.
MAINTENANCE EVERY 50 hours working
- Clean the air filter.
- Check the spark plug and if necessary replace it.
Follow all the maintenance instructions previously described.
- Clean the brushcutter completely and lubrificate the metallic
parts.
- Empty fuel tank and run engine until dry.Store brushcutter
in a dry place.

9. MAINTENANCE SCHEDULE

MAINTENANCE AT 200 hours working
1) Clean the fuel tank and replace the fuel filter
2) Clean the engine.
3) Replace the spark plug.
4)* Remove the cylinder and clean off carbon deposits on
piston, cylinder and exhaust system.
5)* Disassembly the carburettor and replace the diaphragms.
6)* Check and adjust engine valve clearance.
*) As to the procedures for these items, please refer to
your ACTIVE dealer.

10. STORAGE

- Remove the spark plug,put a small amount of oil into the
cylinder rotate the crankshaft several times using the starting
in order to distribute the oil,put the spark plug back in.
ATTENTION: all maintenance operations not reported in this
manual must be carried out by an authorized service center.
30