Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5 Maintenance
5.1 Cleaning
Clean the housing regularly with a damp, soft cloth. The feeder plate is made of stainless chrome
steel and can be removed for cleaning as follows:
1 Disconnect power plug.
2 Press slightly together the side walls of the housing (1) and simultaneously lift off the plastic
cover (2).
3 Detach the feeder plate (3) by turning it counter clockwise along the slotted holes.
4 Clean all contaminated parts using a mild cleaning agent.
5 After cleaning, put the feeder plate and the plastic cover back on the device. Pay attention to the
correct orientation of the cover (the marks on top of the cover have to point to the front).
18
Maintenance
WARNING
Danger of death or serious injury due to electric shock!
Contact with parts that contain a live current can lead to injury and death. If the device
cannot be shut down in an emergency situations, people can be injured or the device
can be damaged.
1
Disconnect the device from the power supply prior to cleaning and maintenance.
2
Only use METTLER TOLEDO power cable, if these need to be replaced.
3
Make sure that no liquid enters into the device or AC/DC adapter.
4
Do not open the device or AC/DC adapter.
These contain no user-serviceable parts.
NOTICE
Damage of the device due to the use of inappropriate cleaning agents!
−
On no account use cleaning agents which contain solvents or abrasive ingredients,
as this can result in damage to the device.
2
1
3
Automatic Feeder
Tabla de contenido
