Daga Flexy-Heat Serie Instrucciones De Uso página 10

ENGLISH
This device is not intended for medical use
in hospitals.
The product can only be used with the
23127 model regulator.
Examine the product on a frequent basis for
signs of wear or damage. If there are any
signs or if the appliance has been used im-
properly or is not working, contact an autho-
rized service centre prior to reconnecting it.
If the cord is damaged, do not use the prod-
uct. The product must be taken to an autho-
rized service centre for repair, otherwise, the
product will have to be discarded.
Do not use the product if it is wet or damp.
Never immerse the remote control in water.
Dry the product prior to use if it shows any
signs of moisture.
The mains connection cable must not be tangled or wrapped around
the product during use.
Do not pull on the cable to unplug it or use it to carry the product.
Do not wrap the cable around the control.
Do not cover or lay the control on top of the regulator control during
use in order to ensure its proper operation.
Use without folding.
Do not stick any pins or needles or any other pointy metal objects
into the product.
Proceed according to the conservation section of this manual for
cleaning.
Do not use the product to warm up animals.
The electric blanket should not be tucked under the mattress.
The product you purchased is intended to be used underneath the
user in the bed.
We do not recommend using the electric blanket in stowaway or
fold-up beds.
The electric blanket should also not be used on inflatable beds, due
to the risk of its deterioration from the effect of the heat.
This product should not be used on water beds.
Prolonged use of the product at elevated temperatures may cause
skin injury; despite the automatic shutdown included in the prod-
uct. In the event of continued use, the temperature controls should
be set to their minimum level of operation (level 1).
Materials will suffer wear and tear over time and after prolonged
use.
Unplug the product immediately from the mains in the event of any
breakdown and contact an authorised Technical support service.
10