Connect Vent System - Haier HCH2100ACS Manual Del Usuario

CONNECT VENT SYSTEM

For non-vented (recirculating) installation only:
1. Assemble the air deflector with the duct cover bracket with 4 - assembly screws
provided with the Recirculation Kit.
2. Measure from the bottom of the air deflector to the bottom of the hood outlet.
3. Cut the duct to the measured size (X).
4. Remove the air deflector.
10
c
a
Assembly Screws
b
Air Deflector
c
Duct Cover Bracket
b
d
e
a
Air deflector
b
Vent clamp
c
X = length to cut vent duct
d
Vent duct
e
Exhaust outlet
a
b
a
X c