Pioneer
™
Count – Place the quantity to be counted on the pan.
APW Optimization – Since the weight of each piece varies slightly, APW Optimization may be used to increase the
accuracy of the count. The balance automatically recalculates the Average Piece Weight when the number of parts
on the pan is less than three times the original sample size. The display shows [APwW.OPT] each time the APW is
optimized.
3.3 Percent Mode
– Use this mode to measure the weight of a sample as a percentage of a reference weight.
To access the Percent Mode, press Unit until the display shows [PErCEnt].
Establish a new Reference Weight - With Clear reference [CLr.rEF] displayed, Press No to use the previously saved
Reference Weight. Press Yes to establish a new Reference Weight. Put the reference sample on the pan and
press Yes to accept or No to abort.
Percent – Place the object(s) to be compared to the reference weight on the pan.
3.4 Weigh Below Feature
Remove Weigh Below Cover
4. SETTINGS
4.1 Menu Navigation
InCal*
AZSM
SPAN
FILTER
**
LINEAR
A.TARE
CAL ADJ
GRAD
END.CAL
GBL RST
END.SET
* InCal models only
** Not available in InCal models
Enter Menu – When the balance is on, press and hold Unit/Menu until [mMENU] appears.
Release the button and the Calibrate [.CAL.] menu will display.
Menu Navigation – Select menus, menu items and settings through use of the Yes and No buttons.
EN-5
Solid arrows point to the content displayed when Yes is pressed, Dashed lines when No is pressed.
Changing Settings – To select the displayed Setting, press Yes. To move to the next Setting, press No.
Exit Menu – When [.END.] is displayed, press Yes to exit the menu function, or press No to return to the Cal menu.
Note: Press and hold No at any time to exit quickly.
8
2014_391_10889_2_Precision-Analytical Series.indb 8
Attach wire or string to Hook
GRAM
COUNT
MILLIGRAM
APWOPT
PERCENT
KILOGRAM
END.MOD
OUNCE
POUND
NOT ALL
UNITS
SHOWN
NO
YES
END.UNIT
www.eu.fishersci.com/fisherbrand
Suspend sample
OUT STA
BAUD
CAL
A. PRINT
PARITY
SETUP
CONTENT
HAND.SH
MODE
LINE FO
END.R232
UNIT
END.PRT
PRINT
RS232
END.LOCK
EN-4
Pioneer
™
28/01/2015 10:40:32