Troubleshooting - Samsung VC-5953 Instrucciones De Uso

DJ68-00159F(0.0) 5/14/03 2:41 PM
OUTLET FILTER
1) Open the grille part, separate the
exhausted filter.
NOTE:
The filters must be completely dried before being replaced in the dust compartment.
USAGE OF FLOOR NOZZLE
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector is in the right position for the type of surface to be
cleaned.
Select the carpet indicator
Select flat surface indicator
FOR UNIVERSAL BRUSH
Use the floor nozzle for cleaning all surfaces.
NOTE:
For optimum efficiency, clean floor brush with crevice tool.
TROUBLE SHOOTING
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Page 8
2) Reassemble it after cleaning or replacing
the filter in the reverse order.
when cleaning carpets.
when cleaning the floors, tiles, etc.
CAUSE
No power supply.
Filter, nozzle, suction hose
or tube is blocked.
Check that the cord is not
twisted or wound unevenly.
7
REMEDY
Check cable, plug and
socket.
Remove the object.
Pull the cord out 2~3m &
push down the cord rewind
button.