Technical Data - testo 104-IR Manual De Instrucciones

12

4. Technical data

4. Technical data
Feature
Penetration probe
Sensor type
Measuring range
Resolution
Accuracy (±1 digit)
Response time t99
Measuring rate
Infrared measurement
Lens
Spectral range
Laser type
Output / wavelength
Class / standard
Measuring range
Resolution
Accuracy (at 23°C, ±1 digit)
Measuring rate
General
Operating temperature
Transportation/
storage temperature
Power supply
Battery life
Housing
Protection class
Dimensions
Weight
Standards
EC Directive
Information on standards
Values
NTC
-50 to +250 °C / -58 to +482 °F
0.1 °C/°F/°R
±1.0 °C / ±1.8 °F (-50,0 to-30,1°C / -58.0 to -22.1 °F)
±0.5 °C / ±0.9 °F (-30,0 to +99,9°C / -22.0 to +211.9 °F)
±1 % of the measuring range (+100.0 to +250.0 °C / +212.0
to +482.0 °F)
10 s (measured in moving liquid)
0.5 s
10:1 + opening diameter of the sensor (12 mm / 0.47")
8 to 14 μm
2-point laser
< 1 mW / 650nm
2 / DIN EN 60825-1:2007
-30 - +250 °C / -22 - +482 °F
0.1 °C/°F/°R
±2.5 °C / ±4.5 °F (-30.0 to -20.1 °C / -22.0 to -4.2 °F)
±2.0 °C / ±3.6 °F (-20.0 to -0.1 °C / -4.1 to 31.9 °F)
±1.5 °C / ±2.7 °F or ±1.5 % of the measuring value (0.0 to
+250.0 °C / +32.0 to +482.0 °F)
0.5 s
-20 to +50 °C / -4 to +122 °F
-30...+70 °C / -22 to +158 °F (without batteries)
2 x AAA batteries
10 h (typical at 25°C / 77°F)
ABS/TPE/PC and die-cast zinc/stainless steel
IP65
281 x 48 x 21 mm / 11.06 x 1.89 x 0.83" (immersion/
penetration probe folded out)
178 x 48 x 21 mm / 7.01 x 1.89 x 0.83"
(immersion/penetration probe folded up)
197g / 0.433lbs (incl. batteries)
EN 13485
2014/30/EC
This product complies with the EN 13485 standard for
penetration measurement.
Suitability: S, T (storage, transportation)
Environment: E (transportable thermometer)
Accuracy class: 0.5
Measuring range: -50...+250 °C
According to EN 13485, the measuring instrument should
be checked and calibrated regularly under the terms of
EN 13486 (recommended frequency: yearly).
Contact us for more information.