GPX CR2807 Manual De Instrucciones página 4

Idiomas disponibles

Idiomas disponibles

Features Defined
1 AC Cord (120V / 60 Hz) The attached AC (Alternating Current) Cord provides power to the Clock
Radio.
2 FM Antenna The FM Wire Antenna provides flexibility and range when adjusting the FM reception. An
AM Antenna is built into the Clock Radio.
3 VOLUME Turn the VOLUME dial clockwise to increase the volume and counter-clockwise to decrease
the volume.
4 HOUR The HOUR button is used to adjust the hour when setting the clock, alarm, or sleep function.
5 MINUTE The MINUTE button is used to adjust the minute when setting the clock, alarm, or sleep
function.
6 TIME Use the TIME button in conjunction with the MINUTE and HOUR buttons, when setting the
clock.
7 SNOOZE Press the SNOOZE button to delay the Alarm for ten minutes after the Alarm sounds.
8 PM A green light appears to the right of the text "PM" to indicate that the set time is in the PM.
9 AL A green light appears to the right of the text "AL" (Alarm) to indicate that the alarm is set.
10 TUNING Turn the TUNING dial clockwise to increase the radio frequency and counter-clockwise to
decrease the radio frequency.
11 DIM Toggle the DIM (Dimmer) switch between HI and LO to adjust the brightness of the LED Display.
12 Battery Back-Up (1 - 9V Battery) The Battery Back-Up will save the clock and alarm settings
in case of a power outage. The display will not be active without AC Power. (Battery Not Included)
13 Frequency Display This display tells you what AM or FM frequency your radio is set to.
14 SLEEP Use the SLEEP button in conjunction with the MINUTE and HOUR buttons to set the sleep
timer. The BUZZER / AUTO / OFF / ON toggle switch must be set to AUTO to activate the sleep timer.
15 ALARM Use the ALARM button in conjunction with the MINUTE and HOUR buttons, when setting
the alarm time.
16 LED Display View the Time, Alarm Time, Sleep Time, PM Indicator, and AL Indicator through this 1.8
inch Light Emitting Diode display.
17 AM / FM Toggle this switch to select between AM or FM Bands.
18 BUZZER / AUTO / OFF / ON Toggle this switch to choose BUZZER (Wake to Buzzer) or AUTO
(Wake to Radio), or to turn the Radio ON or OFF. AUTO is also used to activate the sleep timer.
4
loading