Checking The Digital-Signal; Strengm; Lna - Samsung LN-S2651D Manual De Instrucciones

Checking the Digital-Signal Strength
Unlike analog channels, which can vary in l-eception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception
quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust
your anlcnna to improve the reception of available digital channels.
1. Press the MENU button to display the menu.
Press the A or v buttons to select "Channel", then press the ENTER_ button.
2. Press the _- or v buttons to select "Signal Strength", then press the ENTER_ button.
If the signal strength meter indicates that the signal is weak, physically adjust
your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
Press the EXIT button to exit
LNA (Low Noise Amplifier)
if the TV is operating in a weak-signal area, sometimes TheLNA function can improve the reception (a low-noise preamplifier boosts the
incoming signal).
t. Press the MENU button to display the menu.
Press the A or .,,. buttons to select "Channel", then press the ENTER_ button.
2. Press the _ or _ buttons to select "LNA". then press the ENTER_ button.
3. Press the _ or .,,. buttons to select "On", then press the ENTER_ button.
Press the EXIT button to exit.
LNAfunctionswhen antenna is setto Air or Cable. Settings will be stored
separately in each channel.(See "Selectingthe antenna."on page 32.)
English-36