Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note:
•
Do not use rechargeable batteries. Risk of explosion.
Before using the equipment for the first time, please charge the battery for
•
12 hours uninterrupted.
•
The ITC 4000 has a low battery alert.
SIM card installation
In order to use the ITC4000, you must have a GSM chip of any mobile carrier.
Before installing or removing the SIM card, turn off the ITC 4000.
Note: insert a registered SIM card.
LOCK
UNLOCK
Operation
Turning on
1. After installing the battery and the SIM card, connect a phone or a PBX
system trunk to the port;
2. Position the switch on/off on the ON position;
3. On the display the message "LOADING" will be shown (reading the SIM
card and searching for a GSM network).
Once the connection is established to a GSM network, the display will show
information about the signal intensity, time, date, and battery charge.
Inserting a PIN
82
1. Open the SIM card slot on the
bottom part of the ITC 4000;
2. Unlock the socket;
3. Insert the SIM card in the socket;
4. Lock the socket;
5. Close the slot.
Tabla de contenido
