Lubrication; Switch Action; Carrying Tool - Dolmar AS-1212 Instrucciones De Manejo

6
7
8
9
14
- Fit the saw chain over the sprocket. Install the guide bar so
that its concave portion will contact the saw chain tension
adjusting spring. (Fig. 6)
- Tighten the bolt to secure the guide bar. Install the sprocket
guard and tighten the screws to secure it.
Lubrication (Fig. 7)
CAUTION:
- Always be sure that the tool is switched off and the battery
cartridge is removed before lubricating the saw chain.
- Always use vegetable oil when pruning fruit trees. Mineral
oil may harm trees.
- Lubricate the whole saw chain evenly before each use.
Also lubricate it whenever replacing a fully discharged
battery cartridge with a charged one.
Switch action (Fig. 8)
CAUTION:
- Before inserting the battery cartridge into the tool, always
check to see that the switch trigger actuates properly and
returns to the "OFF" position when released.
- To prevent the switch trigger from being accidentally pulled,
a lock-off button is provided. To start the tool, depress the
lock-off button and pull the switch trigger. Release the
switch trigger to stop.
Carrying tool (Fig. 9)
- Always remove the battery cartridge from the tool and cover
the guide bar with the scabbard before carrying the tool.
Also cover the battery cartridge with the battery cover.