Reset; Other Functions; Air Discharge; First Load - Extraflame HP 15 Manual Del Usuario

Š BUZZER
When set to "OFF" the acoustic signal is disabled.
Š BRIGHTNESS
It allows you to adjust the backlight of the display.
The possible settings range from OFF - 10 to 30.
Activating OFF, the back light of the display will go o after a
preset delay.
The back light will go on as soon as a key is pressed or if an
alarm should be triggered in the machine.
Š CONTRAST
Allows you to change the display contrast.
(Range from 2-50)

• RESET

Allows to reset all values modi able by the user to the
default values.

OTHER FUNCTIONS

AIR DISCHARGE

This function allows to bleed any air in the thermal-product. (For 15 minutes the pump operates alternately, 30 seconds on and
30 seconds o )
To activate the function:
With the generator cold and in "OFF" state press
To stop the "air Bleeding function press the button

FIRST LOAD

This function allows to activate the pellet feeding motor reducer
for continuous functioning.
To activate the function:
With the generator cold and in "OFF" state press
"LOAD" for 5 secs.
To stop the "First load" press the key

COMBUSTION CHAMBER CLEANING

This feature allows you to open the bottom brazier, facilitating the cleaning of the combustion chamber.
To activate the function:
With the generator cold and in "OFF" state press
With the ash hook supplied as standard scrape the walls of the combustion chamber and transfer the residual ash in the
a
brazier room into the ash tray.
After cleaning, press and hold the button
OPEN THE DOOR ONLY WHEN THE OPERATION IS PERFORMED! THE DISPLAY WILL INDICATE THE SUCCESSFUL OPENING!
74 74
and then "AIR" for 5 secs.
and then
CLEANING
and subsequently
.
ENGLISH
FIRST LOAD
for 5 sec.
AIR DISCHARGE