Using The Unit; Connecting Charger To Power Supply - Stihl BGA 85 Manual De Instrucciones

English

Using the Unit

Your blower is designed for one-handed
operation. It can be carried by the
control handle in either the right or left
hand.
Always hold the power tool firmly in your
hand.
Watch out for small animals when blow-
sweeping in open areas, yards and
gardens.
Nozzles
WARNING
To reduce the risk of injury, operate the
unit only with a properly mounted
nozzle.
The round nozzle is particularly suitable
for use on uneven surfaces (e.g. fields
and lawns).
The fan nozzle (special accessory)
produces a broad and powerful
airstream at ground level. It can be
aimed and controlled very accurately.
This nozzle is highly effective for blow-
sweeping sawdust, leaves, grass
cuttings and similar materials from flat
surfaces.
28
Mounting the nozzle
2
3 4
Push the nozzle (1) onto the blower
N
tube (2) – the lug (3) must engage
the groove (4).
Lock the nozzle (1) by rotating it in
N
the direction of the arrow as far as
the stop.
Remove the nozzle in the reverse
sequence.
Connecting Charger to
Power Supply
Power supply (mains) voltage and
1
operating voltage must be the same.
Insert the plug (1) in the wall
N
outlet (2).
A self test is performed after the charger
is connected to the power supply. During
this process, the light emitting diode (1)
on the charger lights up green for about
1 second, then red and goes off again.
2
1
1
BGA 85