Charging Lithium Batteries In Balance Mode - Medion Venom Manual De Funcionamiento

LITHIUM BATTERY PROGRAM (CONTINUED)
The screen shows the real-time progress during charge process. To stop
charging, press Batt Type/Stop button once.
BALANCE CHARGING LITHIUM BATTERY
This feature will charge while equalizing all the individual cell voltages within
the pack. This differs from the regular charge mode, which only looks at the total
battery pack voltage. The battery pack to be charged should be connected to
the suitable balance port of the cell balance block. You also need to connect the
main battery output plug to the output of the charger.
The left side of the first line shows the type of battery you select at the users
setting. The value on the left side of second line sets a charge current and the
value on the right side of second line sets the voltage of the battery pack.
start charging by pressing Star/Enter button. If not, press the Batt Type/Stop
button to go back to previous screen. Carefully check the number of cells of the
battery pack and then press Start/Enter to charge again.
0668
After pressing start, the charger will display the
number of cells you set up and the processor
detects. "R" shows the number of cells recognized
by the charger and "S" is the number of cells
selected by the user on the previous screen. If both
numbers are identical, you can start charging by
pressing Star/Enter button. If not, press the Batt
Type/Stop button to go back to previous screen.
Carefully check the number of cells of the battery
pack and then press Start/Enter to charge again.
After setting the current and voltage press Start/
Enter button for more than 3 seconds to start the
process.
Charge current: 0.1-10A, Voltage: 1-6 Series
After pressing start, the charger will display the
number of cells you set up and the processor
detects. "R" shows the number of cells
recognized by the charger and "S" is the number
of cells selected by the user on the previous
screen. If both numbers are identical you can
[ 13 ]