Inflating The Cuff - visomat handy IV Manual De Instrucciones

C
4. Inflating the cuff
Press the Start/Stop button. The machi-
ne will carry out a function test, and all
display elements will be visible. First the
display shows an arrow down, then "0"
and the cuff will be pumped up automati-
cally to about 190 mmHg. If the pressure
in the cuff is too low, the machine will
continue to pump it up in steps of 30
mmHg at a time.
Inflating the cuff and measuring can be
stopped at any time by pressing the Start/
Stop button again.
To manually control pressurization, hold
down the Start/Stop button immediately
after the start of inflation and release it
GB-40
Display unit operation
No.