Frequently Asked Questions; Getting Started; Safety Information - CASO DESIGN Body Fit Manual Del Usuario

3 FREQUENTLY ASKED QUESTIONS

4 Getting Started

4.1 Safety information

caso Personenwaage Body Fit
 The scale switches off after a few seconds.
Check the batteries for correct polarity and if they are new.
Ensure that your foot has a good contact with the metal surface.
 Is something wrong when "-" appears on the display?
The scale will automatically auto-zero. Please wait a few
seconds until "0" appears on the display.
In the scale a parameter has been stored. Please enter your
data in the scale.
 The scale only shows the weight. Body fat percentage
hasn't been found?
The measurement of the body fat percentage can be disturbed
by not standing still on the scale. Please stand still and upright
and ensure that your feet are bare and in good contact with the
metal surface of the scale.
 The body fat percentage is much higher than normal?
Please check the data programmed in the scale in respect of
sex, size and age.
Ensure that you step on the scale with bare, clean and dry feet
so that your feet are in good contact with the metal surface.
Excessive water loss, stress or horny skin of the foot can
influence the measurement of the body fat percentage.
This chapter will guide you through safely unpacking and
setting up your new unit.
Personal and property damages can occur during
commissioning of the device!
Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a
danger of suffocation.
WARNING
6