Declaration Of Conformity; Technical Data Sheet - McCulloch MT0001 Manual De Instrucciones

WARNING:
steps after each use:
• Allow attachment and gearbox to cool be-
fore storing or transporting.
• Position attachment so that any sharp ob-
ject cannot accidentally cause injury.
• Store the attachment in a dry, well venti-
lated area out of the reach of children.
SEASONAL STORAGE
Prepare attachment for storage at end of sea-
son or if it will not be used for 30 days or more.
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46--36--146500, as authorised
representative in the Community, declare that the grass trimmer model Hedge cutter
attachment with serial numbers dating from 2012 and onwards (the year is clearly stated on
the rating plate, followed by the serial number), comply with the requirements of the
COUNCIL'S DIRECTIVES:
of 17 May 2006 "relating to machinery" 2006/42/EC
of 15 December 2004"relating to electromagnectic compatibility" 2004/108/EC, and
applicable supplements; and
The following standards have been applied: EN ISO 12100:2010, CISPR 12:2007,
EN ISO 10517:2009.
SMP, The Swedish Machinery Testing Institute, Box 7035, SE-750 07 Uppsala, Sweden,
has performed voluntary type examination on behalf of Husqvarna AB. The certificafe is
numbered: SEC/12/2357. The hedge cutter attachment is approved for the following
models:.
McCulloch T22 LS, T22 LCS
12- -09- -19
SPECIFICATIONS
Blade Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16"(406mm)
Max. Cutting Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5/8"(15mm)
Angle Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-90
Blade Arbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1" (25.4mm)
Dry Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.27 kg
STORAGE
Perform the following

DECLARATION OF CONFORMITY

Bo R Jonsson, R&D Manager
Authorized representative for Husqvarna AB and
responsible for technical documentation

TECHNICAL DATA SHEET

If your hedge cutter attachment is to be stored
for a period of time:
• Clean the entire attachment.
• Store in a clean dry area.
• Clean all parts and check for damage.
Have damaged parts repaired or replaced
by an authorized service dealer.
• Keep all nuts, bolts, and screws tight.
• Lightly oil external metal surfaces, includ-
ing the blade.
;
8
o