Stopping The Engine - BLACK&DECKER BM903650 Serie Manual Del Operador

STOPPING THE ENGINE

See Figures 10 and 12.
To stop the engine under normal operating conditions:
 Remove any load from the generator.
 Turn the fuel valve to the OFF position.
 Put the engine switch in the OFF position.
To stop the engine in an emergency situation:
 Put the engine switch in the OFF position.
WARNING:
While operating and storing, keep at least 3 feet of clear-
ance on all sides of this product, including overhead.
Allow a minimum of 30 minutes of "cool down" time be-
fore storage. Heat created by muffler and exhaust gases
may be hot enough to cause serious burns and/or ignite
combustible objects.
OPERATION
UNDERSTANDING THE DIGITAL DISPLAY
See Figure 13.
The digital display shows AC voltage output, frequency, how
long the engine has been running during the current usage
period, and the total number of hours the unit has been used.
To cycle through these displays, press the select button. The
(information type) on the digital display will light in sequence
to show which type of information is being displayed.
Hour meter: The hour meter keeps track of how many hours
the unit has been running during the current operation as
well as the total number of hours the unit has been used.
AC voltage: When selected, the AC voltage indicator will
display the generator's voltage output.
Frequency: When selected, the frequency indicator shows
the generator's output frequency.
MOVING THE GENERATOR
 Turn the engine switch OFF. Disconnect any equipment
that is plugged into the generator.
 Turn the fuel valve to the OFF position.
 Allow 30 minutes of "cool down" time before storing the
machine.
 Tilt the machine away from you until it balances on the
wheels, then roll the machine to the desired location.
Page 15 — English