cecotec CONGA WinDroid 980 Connected Manual De Instrucciones página 23

ENGLISH
Fig. 8.
E. Power cord
F. Power adapter cord
G. Safety suction pad
H. Safety cord
Attach one end of the safety cable into end A on the robot power cord and tighten it.
Connect end A and end B and tighten it.
Place the other end of the safety cable around the safety suction pad's channel and pull it tight.
Fig. 9.
If the length of the power cord restricts the robot's movement, an extension cord of the robot
can be used. Disconnect end A and end B, and connect them with both ends of the extension
cord respectively and tighten it. Only one extension cord can be used with the robot.
How to use the extension cord
Use the extension cord according to the actual distance or the glass size. Each line is 1.5-metre
long. When operating the product outside a tall building, it is suggested to use only a piece of
the extension cord.
Connect the two ends of extension cord separately to the adapter cable end and product cable
end. Tighten the screw buckles. It is suggested to use the safety cord at the same time.
Safety suction pad installation
When you use the robot to clean an inside window: press the safety suction pad firmly on the
top corner of the inside window. Make sure the safety suction pad is attached securely in place.
When you use the robot to clean an inside window: press the safety suction pad firmly on the
top corner of the inside window. Make sure the safety suction pad is firmly secureed in place.
Fig. 10.
Wipe the surface of the safety suction pad with the provided finishing cloth.
Spray cleaning solution
Spray the upper and lower sides of the mop cloth with the cleaning solution. After spraying,
wipe the bottom of the robot with a cloth.
Conga Windroid 980 Connected features Smartphone App. Its Wi-Fi connectivity allows
connecting the robot to your Smartphone and using its different functions while displayed on
your phone (See App manual).
42
3. OPERATION
Do not unplug the device from the power supply when the robot is working, otherwise, the
product may fall off.
Fig. 11.
Start
Plug in the robot.
Let the battery charge between 1.5 and 2 hours before using the robot.
Switch on the robot
Fig. 12.
Move the switch to the "-" position. The status light indicator will turn on blue when the robot
is turned on.
* Keep objects away from the robot 's fan to avoid blockage.
Place the robot on the glass
Place the robot on the window at least 10 cm (4") from window corners or other obstacles.
The robot has successfully attached to the window when the status indicator light glows a
continuous blue.
Please ensure there is a 13-cm (5.1") free space between the glass and any obstacle in the
room, like curtains or furniture.
Start cleaning
There are two methods to start the robot:
Press Start/Pause button on the robot or on remote control to start cleaning. Conga WinDroid
980 Connected automatically chooses "N" cleaning mode.
Choose between N or Z mode on the remote control depending on the window's shape.
Use the remote control to start the product. N Cleaning Mode is best for tall windows.
Fig. 13.
Use the remote control to start the product. Z Cleaning Mode is best for wide windows.
Fig. 14.
Pause
Pause the robot during cleaning by pressing Start/Pause button on the robot or on the remote
control.
While the robot is paused, you can control the product's working direction or operating mode
through the buttons on the remote control.
ENGLISH
980 CONNECTED 43