Cleaning And Maintenance; Cleaning The Condenser - Tecnomac AQUAMAC 100 Manual De Instrucciones

Before performing cleaning or maintenance
work ensure the electrical supply is disconnect-
ed.

CLEANING THE CONDENSER

1) The accumulation of dust on the front area of
the condenser reduces the efficiency of the
refrigeration circuit.
The condenser should therefore be regular-
ly cleaned using a soft brush or a vacuum
cleaner.
THIS OPERATION MUST BE PERFORMED WHEN THE
APPLIANCE IS POWERED DOWN

6. CLEANING AND MAINTENANCE

YOU MUST REQUEST THE ASSISTANCE OF A LICENSED TECHNICAL TO SOLVE
THE FOLLOWING FAULTS
W W A A R R N N I I N N G G ! !
W W A A R R N N I I N N G G ! !
THE FOLLOWING PROCEDURES
MUST BE PERFORMED
BY A LICENSED INSTALLER
2) Check the level of scale deposits on the
cooling coil in the tank at least once a year.
Scale can be removed using a citric
acid/water solution. This precaution elimi-
nates wastage of electricity and improves
refrigeration efficiency.
3) If the appliance is to remain idle for a pro-
longed period, drain the water from the tank.
4) periodically clean the water filter cartridge
(see fig. 16)
5) ATTENTION
The condenser has sharp edges. Clean with
brush or vacuum cleaner only.
W W A A R R N N
W W A A R R N N
I I N N G G ! !
I I N N G G ! !
GB
19